Placa de Controle de Senha para Sistema de Controle de Acesso Emissão de Impressão Digital K219-b Mais G16 Dc12v Transmissores

Instructions for K219-B control board:

1. SET Button(K1-K6):

1.1 Add User fingerprint: Press SET button shortly,blue indicator light flash fast means system in register state, put the finger in the collection area,fingerprint register successful when hearing music. 10 pieces fingerprint can be registered continuously when system in register state; if no need adding fingerprint more, waiting a few seconds to exit.[Each SET button(K1-K6) can register 10 pieces fingerprints]

1.2 Delete fingerprint:

1.2.1 Delete single relay position fingerprints: Long press the corresponding SET button,blue indicator light flash fast,hear long ”Di” beep,loosen the finger,the relay indicator light on, means this location of the fingerprints are deleted;

1.2.2 Delete all relay position fingerprints(Back to factory default): Long press any SET button to hear long “Di” beep twice, all indicator light on, means initialization operation successful,back to factory default.

2.Keypad Settings

For all operation Settings,need to press the administrator fingerprint/password first. The default password is 123456. Password length: 3-6 bits

2.1 Set Administrator Fingerprint:Touch the fingerprint module, and the indicator light is on,press 123456?OK?1?OK?

Blue indicator light flash fast means system in register state, put the finger in the collection area,fingerprint register successful when hearing music. 10 pieces fingerprint can be registered continuously when system in register state; if no need adding fingerprint more, waiting a few seconds to exit.If the fingerprints is full, will have “Di Di Di” warning tone.

?In addition to setting functions, administrator fingerprint can unlock all relay switches.If unlocking No.3 relay, press the number 3 after the administrator fingerprint passes.

Note: When the administrator fingerprint is repeated with the user fingerprint,priority is given to the administrator fingerprint function.

2.2 Clear the System and Back to Factory Mode:Pass the administrator’s fingerprint/password,enter in edit mode: Press:?OK? 1?C?(Long press C)

All relay lights are on, indicating that the emptying is successful and back to factory mode.

2.3 Set Administrator Password:Pass the administrator’s fingerprint/password, enter in edit mode: Press:?OK?2?OK?New Password?OK?

After the password is set successfully, the previous password will be over written and invalid. The admin password only can be used for admin settings and cannot be unlocked.(Password length: 3-6 bits)

2.4 Set User Fingerprint: Pass the administrator’s fingerprint/password, enter in edit mode: Press:?OK?3?OK?Relay Position(1-6)?OK?

Blue indicator light flash fast means system in register state, put the finger in the collection area,fingerprint register successful when hearing music. 10 pieces fingerprint can be registered continuously when system in register state; if no need adding fingerprint more, waiting a few seconds to exit.If the fingerprints is full, will have “Di Di Di” warning tone.(10 fingerprints per relay position)

Note: when one finger registered in several relay positions at the same time,the finger can open different relays, and the interval time is 0.5 seconds

2.5 Delete User Fingerprint:Pass the administrator’s fingerprint/password, enter in edit mode: Press:?OK?3?C?Relay Position(1-6)?C?(Long press the second C)

The light in this location will turn on and can hear music, indicating that the fingerprint of the relay position has been deleted successfully

2.6 Set Relay Password:Pass the administrator’s fingerprint/password, enter in edit mode: Press:?OK?4?OK?Relay Position(1-6)?OK?New Password?OK?

The password length is 3-8 digits. The relay password cannot be repeated with the administrator password. If repeated,will have “Di Di Di” warning tone.

2.7 Delete Relay Password: Pass the administrator’s fingerprint/password, enter in edit mode: Press:?OK?4?C?Relay Position(1-6)?C?(Long press the second C)

The light in this location will turn on and can hear music, indicating that the password of the relay position has been deleted successfully.

2.8 Set Relay Mode:Pass the administrator’s fingerprint/password, enter in edit mode:Press:?OK?5?OK?Relay Position(1-6)?OK?Relay Mode(1-6)?OK?

Mode 1: Relay Time 0.5s

Mode 2: Relay Time 1s

Mode 3: Relay Time 2s

Mode 4: Relay Time 3s

Mode 5: Relay Time 10s

Mode 6: Relay Time 20s